Smart Pump Control
Premium Version • v1.2.0
An advanced Pump & Compressor Dual-Mode Controller with Voltage Protection, Dry-Run Auto-Retry, Solenoid Venting, and Cloud Tracking.
Compatible with ESP32-S3. Connect via USB.
📘 Access Documentation & Cloud Dashboard:
🚀 Quick Setup
- WiFi Setup: Connect to hotspot
Auto-Pump-Config(Password:12345678). - Configure: Open 192.168.4.1 and enter your Home WiFi details.
- Access: After reboot, visit the device IP or
http://smartpump.localto access the dashboard. - Settings: Set your Tank Height, Voltage Limits, and Auto-Retry logic in the settings menu.
🛡️ Safety & Features
- Dual-Mode: Switch between Water Pump and Air Compressor operations.
- Solenoid Venting: Automatic pressure release valve for compressor reliability.
- Voltage Guard: Automatic cut-off (>250V or <170V).
- Dry-Run System: Smart flow detection with Auto-Retry or Lock modes.
- Cool-Down Logic: Hardware overheating protection for high-demand loads.
- Smart Scheduling: DND mode for automated overnight silence.
🔌 Wiring Guide (ESP32-S3)
| ESP32-S3 | |||||
|
🖥️ LCD (SDA)
|
|
GPIO 01 | GPIO 02 |
|
🖥️ LCD (SCL)
|
|
⚡ Volt Sensor
|
|
GPIO 04 | GPIO 05 |
|
📏 Ultra Trig
|
|
📏 Ultra Echo
|
|
GPIO 06 | GPIO 07 |
|
🔔 Buzzer
|
|
⚙️ Motor
|
|
GPIO 08 | GPIO 09 |
|
🔘 Manual Btn
|
|
💨 Solenoid
|
|
GPIO 10 | GPIO 18 |
|
🌊 Flow Sens
|
|
🌈 RGB LED
|
|
GPIO 48 | --- |
|
|
Developed by Aung Moe Khine